Street Cut Schematic

Boring with all Prairie Dog machines is simple.  The basic thing to remember is that you need proper setup.  Watch the video, read your instructions thoroughly, understand what the equipment is engineered to do and you can bore a hole easily and successfully.

Simply dig a small trench, align the drill stem in the trench and connect your fluid source to the machine.  Then install your drill stem and pilot bit, and turn on the liquid.

Start the bit rotating and advance the machine forward.  Add extra drill stem until you come out at your target point.  Then remove the pilot bit, replace it with the desired size of backreamer and reverse through the pilot hole.

Watch the video and see the manual for total instructions.


Many attachments and special bits are available for Prairie Dog machines.